Acetyl Octapeptide-3 (SNAP-8) Powder CAS 868844-74-0 | High Purity GMP Peptide Manufacturer for Bulk Supply
Core Selling Points
- Which peptide is on the quote? CAS 868844-74-0 names the acetylated form.
- The report should read 1075.17 g/mol - the weight of the acetyl-bearing chain.
- Weigh with confidence: assay and moisture are stated for each lot on the COA.
- Sample first, then bulk - one specification from the vial to the drum.
What Is Acetyl Octapeptide-3 Powder?
Under CAS 868844-74-0, Acetyl Octapeptide-3 Powder is an acetyl-bearing peptide with formula C41H70N16O16S and molecular weight 1075.17 g/mol. The powder is white to off-white and assayed at 98% minimum. Because the acetyl group is part of the defined structure, the identifier and the stated weight are what separate one quote from another; buyers verify both plus the assay basis.
HDM BIO manufactures this peptide at its Xi'an site, in operation since 2012, and assays each batch before release. A batch certificate accompanies every shipment. New customers evaluate a small sample first and lock the specification before bulk is produced.
Acetyl Octapeptide-3 Powder An order is only as good as the identity and the numbers behind it - start with these.
Why Buyers Choose HDM BIO for Acetyl Octapeptide-3?
Two questions come up repeatedly with this peptide: whether the acetyl form is really supplied, and what the purity number is measured against. The points below answer both.
- Confirm The Acetyl Form. CAS 868844-74-0 names the modified peptide on the quote.
- Match The Molecular Weight. 1075.17 g/mol is what your certificate should report.
- Weigh from the report: the assay and moisture lines tell you what the powder really contains.
- Prove it on a bench scale: your lab checks identity on a trial lot before volume is discussed.
- Consistency is contractual here - bulk lots follow the specification set by the sample.
Acetylated Or Non-Acetylated Peptide?
The acetyl group changes both the identity and the molecular weight. This page describes the acetylated form; make sure the purchase order asks for it.
| Item | Acetyl Octapeptide-3 | Non-acetylated form |
|---|---|---|
| Identity | CAS 868844-74-0 | Separate identifier |
| Molecular weight | 1075.17 g/mol | Different, without the acetyl group |
| COA focus | Identity, assay, moisture | Identity and assay |
| Buyer check | Confirm the acetyl form | Confirm the plain chain |
How Is Quality Verified Through COA Testing?
Release depends on identity and strength matching the specification. The table illustrates the report format; the certificate with your goods gives the figures for your lot.
| Item | Specification | Result | Test Method |
|---|---|---|---|
| Appearance | White to off-white powder | Conforms | Visual |
| Identity | Conforms to reference | Conforms | HPLC / MS |
| Assay | 98.0% min | 98.5% | HPLC |
| Loss on drying | Within specification | 0.7% | Gravimetric |
| Purity (HPLC) | 98.0% min | 98.5% | HPLC |
| Conclusion | Conforms to specification | ||
The delivery includes a lot certificate, a safety data sheet, the technical sheet and the batch record. Independent checks are welcome.
What Should You Check When Buying Acetyl Octapeptide-3?
Confirm identity and the basis of the purity figure before you compare suppliers. Four checks keep the lot usable.
| Check | What to Confirm |
|---|---|
| Identity | CAS 868844-74-0 and the acetyl form on the COA |
| Assay basis | Whether 98% is measured on a defined basis |
| Appearance & moisture | White to off-white powder with moisture reported |
| Documents | COA, SDS, specification and lot traceability |
Acetyl Octapeptide-3 Sample Evaluation
Use a small lot to check identity and how the powder behaves in your system. That approved sample sets the specification for the commercial batch.
Sample → CAS Confirmation → COA Review → Formula Trial → Bulk Order
Applications of Acetyl Octapeptide-3 Powder
- Trial bases: the powder is measured into small cosmetic test preparations.
- Comparative study: labs look at acetylated peptides side by side.
- Dock checks: identity and assay on the sheet are matched to the delivered drum.
- Volume orders: contract producers take bulk lots for their own product lines.
FAQs
Q: Which CAS names the modified form of this peptide?
A: CAS 868844-74-0 identifies the acetylated material sold here. A quote without that number may be for a different chain, so confirm it first.
Q: What molecular weight should the report show?
A: 1075.17 g/mol is the figure for this form. It is a simple way for your lab to spot a wrong material before the powder is used.
Q: What does the 98% figure measure?
A: It is the assay on a stated basis for this peptide. Ask the supplier to show that basis on the certificate, since two quotes with the same number can mean different things.
Q: How do buyers confirm the acetylated form?
A: Read the identity line on the COA together with the stated molecular weight. The two together are stronger than the product name alone.
Q: Which documents travel with a bulk order?
A: Each delivery carries the lot certificate, safety data sheet, technical sheet and batch record, so your QA team has a file to review.
Q: What is this powder used for in formulation work?
A: It is measured into small cosmetic test preparations and used in comparative lab studies, sold as a raw material to business buyers.
Factory



Certificate

Shipping & Packing

Order Acetyl Octapeptide-3 From A Cosmetic Peptide Supplier
From sample vial to production drum, Acetyl Octapeptide-3 Powder comes with a batch certificate at every stage. Buyers trial it, fix the specification and order bulk directly from the plant.
See the test report · Request a sample · Ask about bulk
WhatsApp: +86 19991242181
Email: sales@hdmbio.com
Hot Tags: acetyl octapeptide-3 powder, China acetyl octapeptide-3 powder manufacturers, suppliers, factory, Octreotide Powder
















