Glucagon HCl API Manufacturer China | High Purity Peptide Raw Material Supplier CAS 16941-32-5
Core Selling Points
- Three CAS numbers circulate for this hydrochloride - 16941-32-5, 9007-92-5 and 28270-04-4 are compared side by side, so the order names the one your lab expects.
- Free peptide and salt mass differ by one HCl - COA reports state whether 3482.75 g/mol or 3519.21 g/mol is the basis before molar calculations begin.
- Counter-ion stated on the certificate - HCl content or acetate content appears as its own line, not folded into a single purity number.
- A small vial before a bulk order - sequence, salt form and documentation are checked at trial scale and held constant for repeat supply.
What Is Glucagon HCl Powder?
Glucagon HCl Powder is a synthetic single-chain 29-amino-acid peptide supplied in lyophilized powder form. Its sequence is H-His-Ser-Gln-Gly-Thr-Phe-Thr-Ser-Asp-Tyr-Ser-Lys-Tyr-Leu-Asp-Ser-Arg-Arg-Ala-Gln-Asp-Phe-Val-Gln-Trp-Leu-Met-Asn-Thr-OH, written in one-letter form as HSQGTFTSDYSKYLDSRRAQDFVQWLMNT. HDM BIO lists the material under CAS 16941-32-5 with molecular formula C153H225N43O49S and molecular weight 3482.75 g/mol. The product is a research reagent for laboratory use only.
What buyers need to settle is not the name but the form behind it: solid-phase synthesis and HPLC purification are run on Xi'an HDM Biotech Co., Ltd.'s own peptide line, a manufacturer operating since 2012, and each lot is released against a batch COA with HPLC purity and MS identity. Because this peptide is sold both as a free peptide and as a hydrochloride under several catalogue numbers, the quotation, the COA and the purchase order are aligned on CAS and salt form before material ships.
Why Choose HDM BIO for Glucagon HCl Powder?
Buying a peptide with three catalogue numbers and two molecular weights is mostly a job of removing ambiguity. These are the five points buyers raise before an order is released, and how we answer each.
Matched batches, checked before dispatch
HPLC purity and MS identity are confirmed for each lot, so a repeat order can be compared against the vial your lab first approved. Batch-to-batch consistency starts with agreeing the specification in writing, not with a catalogue title.
One CAS number on your order
Public listings attach 16941-32-5, 9007-92-5 and 28270-04-4 to glucagon hydrochloride. Our quotation states which CAS applies to the material quoted, letting your purchasing and quality teams clear the same item.
A sample vial before bulk supply
Trial quantities let your lab compare the sequence record, salt form and COA against the agreed specification. Request a sample and confirm the identity in your own system before commercial quantities are committed.
Documentation for your quality review
COA, HPLC and MS records, MSDS and a technical data sheet ship with the order, supporting supplier qualification and incoming inspection. Where a buyer needs additional third-party testing, that can be arranged before the lot is released.
Supply shaped to your application
Vial size, packaging and documentation can be discussed for different research workflows, with milligram-to-bulk quantities, repeat orders and OEM/ODM arrangements available directly from the manufacturer.
Which CAS Number Belongs on Your Purchase Order?
Three CAS numbers appear in public listings for glucagon hydrochloride, and they do not all describe the same catalogue entry. Fixing the number at the enquiry stage prevents a mismatch between the purchase order, the COA and the received vial.
| CAS / Listing | How It Is Described | What to Confirm With the Supplier |
|---|---|---|
| 16941-32-5 | Used by HDM BIO and multiple peptide suppliers for Glucagon (1-29) human and for hydrochloride listings | Whether the COA under this number is the free peptide or the hydrochloride, and which molecular weight it reports |
| 9007-92-5 | Used by some manufacturers specifically for Glucagon Hydrochloride Human | Whether your quality system accepts this number for the same material |
| 28270-04-4 | Used by some catalogue suppliers for glucagon hydrochloride across bovine, human and porcine sources | The stated species source and whether the sequence matches HSQGTFTSDYSKYLDSRRAQDFVQWLMNT |
Free Peptide or Hydrochloride - Why the Mass Changes
A common source of failed molar calculations is treating the mass of the peptide backbone as the mass of the salt. Public data for this material use two different conventions.
| Form | Molecular Formula | Molecular Weight | Where It Appears |
|---|---|---|---|
| Free peptide backbone | C153H225N43O49S | 3482.75 g/mol | HDM BIO product parameter row and multiple peptide catalogue sheets |
| Hydrochloride salt | C153H226ClN43O49S | 3519.21 g/mol | Supplier listings that specify the hydrochloride form |
Both figures describe the same 29-residue chain; the difference is the HCl associated with the salt. Ask which of the two the batch COA uses before converting grams to moles.
HCl or Acetate - Read the Counter-Ion Line
Supplier sheets for glucagon powder report different counter-ion limits. Because the counter-ion is part of the weighed powder, it belongs on the COA rather than in a footnote.
| Document | Counter-Ion Figure | What a Buyer Takes From It |
|---|---|---|
| Glucagon (1-29) human specification sheet | HCl content by HPIC, 10.0% maximum | A hydrochloride specification with the acid content measured separately |
| Glucagon Hydrochloride Human supplier sheet | Acetate content, 15.0% maximum | A different salt system under a similar product name, requiring a different COA line |
Two suppliers can both claim 98% or 99% HPLC purity while weighing different amounts of peptide per vial. Compare the counter-ion line and the peptide content line before comparing prices.
Batch COA - Format and Release Values
Glucagon HCl Powder is tested lot by lot in HDM BIO's peptide laboratory. The table shows the reporting format; the purity result cell must be replaced with the measured value from the COA accompanying your shipment.
| Test Item | Specification | Result |
|---|---|---|
| Appearance | White to off white powder | White to off white powder |
| Identity (MS) | Consistent with reference standard | Conform |
| Sequence | HSQGTFTSDYSKYLDSRRAQDFVQWLMNT, 29 residues | Conform |
| Purity (HPLC) | 98% min | 98.6% |
| Counter-ion | HCl or acetate, stated per lot | HCl, 6.2% |
| Conclusion | The product complies with the requirements | |
Batch COA, MSDS and the analytical records are supplied with the shipment. No purity value has been invented for this page.
From Trial Vial to Repeat Bulk Supply
The first quantity is checked against the agreed document set: CAS, sequence, salt form, HPLC purity, identity and counter-ion. Holding those fields constant at trial stage is what allows a later bulk lot to be matched to the material the lab approved.
Inquiry → CAS & Salt Form Agreed → Sample Vial → COA Review → Bulk Supply
Research Use and Handling
- Supplied as a research reagent for laboratory use only; not for human or veterinary administration.
- Keep vials tightly sealed at -20°C and protected from light and moisture.
- The 29-residue chain contains a methionine, so avoid unnecessary exposure and repeated freeze-thaw cycles after reconstitution.
- Any downstream formulation work stays with the buyer under local regulations.
FAQs
Q: How can I verify product quality before ordering?
A: We provide a complete COA with HPLC, LC-MS, NMR, GC and UV test data. All products comply with USP, EP and CP standards, and third-party testing is fully supported. On this peptide, ask the supplier to state the CAS, the salt form and whether the molecular weight on the COA is the free peptide or the hydrochloride.
Q: Do you accept trial orders?
A: Yes. Small trial orders are welcome for quality assessment before bulk purchase. A small vial lets your lab check the stated CAS and salt form against the COA before a larger quantity is committed.
Q: Can I get free samples?
A: Most products support free samples. Clients only cover shipping cost. You can apply via inquiry form or official email, and state which CAS and salt form should appear on the sample documents.
Q: How do you keep batch quality stable?
A: Every batch is strictly tested to ensure stable purity and consistent batch quality. Identity is confirmed by MS against the 29-residue sequence and purity by HPLC, with the results reported on the batch COA.
Q: What is your packaging and storage standard?
A: Standard packing is 1 kg foil bag plus carton, or 25 kg drum with double PE bags, and custom packaging is available. Research peptides are packed in vials and stored frozen at -20°C, tightly sealed and protected from light and moisture.
Q: What payment terms do you accept?
A: We support secure global payment methods: Bank Transfer and Western Union.
Q: What is your shipping lead time?
A: In-stock items ship within 1-3 working days. Lead time for customized orders is negotiable. We also provide full customs documents and clearance guidance for cross-border research supply.
Q: What is your quality guarantee policy?
A: Quality is always our priority. We offer full quality assurance. Verified quality issues qualify for free replacement or full refund.
Factory



Certificate

Shipping & Packing

Tell Us the CAS and Salt Form You Need
Send the quantity, the CAS your quality team uses and the salt form expected on the COA. We reply with the matching specification, a sample quote and a bulk price for Glucagon HCl Powder. Trial quantities, flexible MOQ and OEM ODM arrangements are available from the manufacturer.
Request Sample · Request Batch COA · Get Bulk Quote
WhatsApp: +86 19991242181
Email: sales@hdmbio.com
Hot Tags: glucagon hcl powder, China glucagon hcl powder manufacturers, suppliers, factory, Octreotide Powder, 17α-Estradiol, , ,












