Home / Products / Peptides / Details
video
Cetrorelix Acetate API

Cetrorelix Acetate API

CAS Number: 120287-85-6
Molecular Formula: C70H92ClN17O14
Molecular Weight: 1431.04
EINECS: 686-384-6
Appearance: White to off white powder
Specification: 98% min
Test Method: HPLC
MOQ: 1g
Sample: Available
Stock: Fresh Stock
Storage: Cool Dry Place
Shelf Life: 2 Years Proper Storage
Service: OEM&ODM Service
Certificate: COA,GMP,ISO,HACCP
Payment Method: Bank Transfer,Western Union
Shipping: Dedicated line, courier, air & sea freight

Product Introduction

Cetrorelix Acetate Powder Manufacturer in China | High Purity GnRH Antagonist Peptide API CAS 120287-85-6

Core Selling Points

✅ Five D-config residues mapped on the LC-MS trace - D/L configuration confirmed at each non-L position per lot

✅ Three non-standard side chains identified - Nal(2), Cpa(4-Cl) and Pal(3) matched against the listed structure

✅ Ac cap and D-Ala-NH₂ terminus documented - end groups stated on the batch COA

✅ 1 g entry vial, refrigerated packing - evaluation pack sized for decapeptide reference work

What Is Cetrorelix Acetate API?

Half of this ten-residue chain sits in the D-configuration, where a single D/L swap changes the mass pattern enough to fail an identity check. Positions 1, 2 and 3 further carry engineered side chains - 2-naphthyl, 4-chlorophenyl and 3-pyridyl alanines - so a plain standard residue count does not identify the lot.

Cetrorelix Acetate API ships as a white to off-white solid, sequence Ac-D-Nal(2)-D-Cpa-D-Pal(3)-Ser-Tyr-D-Cit-Leu-Arg-Pro-D-Ala-NH₂, molecular formula C₇₀H₉₂ClN₁₇O₁₄, MW 1431.04 (anhydrous free base), acetate salt. It dissolves slightly in heated DMSO and very slightly in methanol; the COA records the recommended diluent direction.

The entry pack is 1 g per vial; larger gram scales are quoted per project. This is a research and formulation raw material - finished-product work stays with the buyer's team.

Why Buyers Choose HDM BIO for Cetrorelix Acetate API

  • Trial vial sized for a decapeptide - first order stays at 1 g; no drum commitment before the reference check
  • D/L configuration on the mass record - each D residue appears on the LC-MS report rather than the product brochure
  • Engineered side chains confirmed - Nal(2), Cpa(4-Cl) and Pal(3) matched against the listed structure per lot
  • Solubility guidance with the lot - DMSO heating and methanol notes passed over with the COA
  • Factory account in Xi'an - Xi'an HDM Biotech Co., Ltd., No.6299 Lanchi Second Road, Xi'an, Shaanxi, China

Order Tiers

Order Tier Who It Suits Typical Lead Time
1 g vial Reference check and diluent screening Fresh stock
5 g – 10 g Assay setup and method work 7–15 days
50 g and above Ongoing research programme Quoted per order
Bespoke vial / label Private-label research packs On request

Prices are negotiable based on order quantity.

What to Check on the Batch COA

Buyer Check Why It Matters to Your Project
Sequence (LC-MS) Ten-residue mass matches the listed chain; truncation absent
D/L configuration Five D residues confirmed against the L-form
Non-standard side chains Nal(2), Cpa(4-Cl), Pal(3) identified per lot
C-terminal amide D-Ala-NH₂ present, not a free-acid terminus
HPLC purity (≥98.0%) Impurity window for your assay method
Peptide content Net peptide weight after acetate and water
Water (Karl Fischer) Keeps the lyophilized spec honest

Quality Specifications and Batch Documentation

Every batch passes the QC panel in HDM BIO's peptide laboratory, and the matching COA travels with the delivered vials.

Test Item Specification Result
Appearance White to off-white solid White to off-white solid
Sequence (LC-MS) Matches Ac-D-Nal(2)-D-Cpa-D-Pal(3)-Ser-Tyr-D-Cit-Leu-Arg-Pro-D-Ala-NH₂ Conform
D-Residue Configuration Five D-configured residues Conform
HPLC Purity ≥98.0% 98.2%
Peptide Content 80.0–95.0% 83.5%
Water (Karl Fischer) ≤8.0% 4.2%
Residual Solvents Meets ICH Q3C Complies
Conclusion The product complies with the requirements Pass

Raw Material Reference Comparison

Raw Material CAS Reference
Cetrorelix 120287-85-6 Synthetic decapeptide research raw material
Buserelin 57982-77-1 9-mer linear synthetic peptide research raw material
Thymosin Beta-4 77591-33-4 Synthetic 43-residue linear peptide research raw material
Taspoglutide 275371-94-3 Modified 30-residue synthetic peptide research raw material

This table is for raw-material identification reference only.

What Is Cetrorelix Acetate API Used For?

Research and formulation teams put Cetrorelix Acetate API to work across the following R&D scenarios:

  • D-config decapeptide reference and stereochemistry bench work
  • DMSO-based reconstitution and diluent method development
  • Formulation R&D raw material supply
  • Analytical reference material comparison

All descriptions refer to raw-material and research-reagent use only. Any downstream application stays with the buyer under local regulations.

Storage & Handling

  • Keep the vial sealed and desiccated under refrigerated conditions; away from moisture
  • Store in the dark; keep the container away from direct light
  • Allow the vial to reach room temperature before opening to limit condensation
  • Reconstituted portions should be used promptly; repeated freeze-thaw cycles are avoided
  • Formulation R&D raw material only; finished-product dosing decisions stay with the buyer

FAQ

Q: What entry pack size can you release?

A: The entry pack is 1 g per lot, one vial with its own COA.

Q: Can the COA and LC-MS record be reviewed before purchase?

A: Yes. The current-lot COA and LC-MS trace are available on request before ordering.

Q: How soon after confirmation does a 1 g pack leave the warehouse?

A: Fresh-stock vials ship on confirmation under refrigerated export.

Q: How many residues are in the D-configuration?

A: Five of the ten residues carry the D-configuration; the LC-MS report confirms each position.

Q: Is the C-terminus amidated?

A: Standard supply is D-Ala-NH₂ carboxamide; the free-acid alternative is quoted on request.

Q: Which solvent is recommended for reconstitution?

A: DMSO with mild heating gives the better solubility; methanol is very slightly soluble. The COA notes the recommended direction.

Factory

Peptide synthesis line producing Cetrorelix Acetate API, HDM BIO Xi'an

LC-MS D/L configuration check for Cetrorelix Acetate API, HDM BIO QC

Sealed vials of Cetrorelix Acetate API prepared for refrigerated export, HDM BIO

Certificate

ISO 9001 quality certificate for Cetrorelix Acetate API manufacturer, HDM BIO Controlled peptide production document for Cetrorelix Acetate API, HDM BIO

Shipping & Packing

Refrigerated vial packing for Cetrorelix Acetate API export shipment, HDM BIO

Need the Decapeptide Grade for Your Formulation Line? Send Your Spec - We Match the Lot

Share the gram amount and whether your dossier requires the D-residue configuration statement on the COA. Our team confirms the matching lot, pricing and document set the same day. Evaluation vials move from fresh stock; gram-scale follow-ups are scheduled after incoming QC.

[Request 1 g Vial] [Request Batch COA] [Get Gram-Scale Quote]

COA and MSDS travel inside each parcel; the HPLC trace and LC-MS record can be forwarded ahead on request.

WhatsApp: +86 19991242181

Email: sales@hdmbio.com

Our line supplies the decapeptide raw material; formulation development and finished-product decisions remain with your team. Contact HDM BIO for Cetrorelix Acetate API.

Hot Tags: cetrorelix acetate api, China cetrorelix acetate api manufacturers, suppliers, factory, 17α-Estradiol, Octreotide Powder, , ,

Send Inquiry

whatsapp

Phone

E-mail

Inquiry

Bag