Cefquinome Sulfate API Manufacturer China | ≥98% Fourth-Generation Cephalosporin Veterinary Antibiotic CAS 118443-89-3
Key Selling Points
✅ CPV-Grade Assay - ≥80% cefquinome (anhydrous), the correct potency basis for the sulfate salt
✅ Animal-Only 4th-Gen Cephalosporin - Broad-spectrum, highly β-lactamase-stable
✅ Injectable Grade Option - Sterility, endotoxin (<0.10 EU/mg) and visible-particle testing
✅ Cattle & Swine Specialist - For 2.5%/5% injections and intramammary mastitis products
What Is Cefquinome Sulfate?
Cefquinome Sulfate powder is the sulfate salt of cefquinome, a fourth-generation cephalosporin developed solely for veterinary use. It is a broad-spectrum, β-lactamase-stable bactericidal antibiotic that inhibits bacterial cell-wall synthesis, supplied as an off-white to pale yellow, hygroscopic powder. Because it is a sulfate salt, potency is expressed as cefquinome content (≥80% on an anhydrous basis), not as a 99% chemical assay.
HDM BIO supplies Cefquinome Sulfate Powder in both non-sterile and sterile/injectable grades from 1 kg to tonne-scale orders for veterinary drug manufacturers producing 2.5%/5% injections, powder for injection and intramammary mastitis infusions. It is slightly soluble in water and is typically formulated with an alkalizing aid for injection.
This is an animal-only veterinary API. It is not for human use and must be prescribed and used under veterinary supervision.
Cefquinome Sulfate Quality Specifications and Batch Documentation
Every batch is tested in HDM BIO's QC laboratory. Batch-specific COA is provided with each shipment.
| Test Item | Specification | Result |
|---|---|---|
| Appearance | Off-white to pale yellow, hygroscopic powder | Off-white to pale yellow powder |
| Identification | IR concordant; HPLC retention time | Conform |
| Assay (as cefquinome, anhydrous) | ≥80.0% | 84.5% |
| pH (10 mg/mL) | 1.6 – 2.6 | 2.1 |
| 5,6,7,8-Tetrahydroquinoline (HPLC) | ≤1.0% | 0.30% |
| Any Single Impurity (HPLC) | ≤1.0% | 0.40% |
| Total Impurities (HPLC) | ≤3.0% | 1.20% |
| Iodide | ≤0.01% | Complies |
| Water Content (KF) | ≤5.0% | 3.20% |
| Residue on Ignition | ≤0.3% | 0.12% |
| Heavy Metals | ≤20 ppm | <10 ppm |
| Bacterial Endotoxin (injectable) | <0.10 EU/mg | 0.06 EU/mg |
| Sterility (injectable) | Complies (membrane filtration) | Complies |
| Residual Solvents | ICH Q3C limits | Complies |
| Particle Size | Micronizable on request | Complies |
| Conclusion | The product complies with the requirements | |
What Is Cefquinome Sulfate Used For?
- Cattle: Bacterial respiratory infections (Pasteurella multocida, Mannheimia haemolytica), neonatal calf septicaemia and foot disease
- Bovine mastitis: Intramammary infusions for lactating and dry-period cows (75 mg per affected quarter)
- Swine: Respiratory tract infections
- Horses: Susceptible bacterial respiratory infections
- Dosage forms: 2.5%/5% injections, sterile powder for injection and intramammary infusions
All uses are veterinary indications. Target species, dosing, withdrawal and MRLs are set by finished-product manufacturers and veterinary authorities.
Cefquinome vs Other Veterinary Cephalosporins
| Product | Generation | CAS | Main Animal Use |
|---|---|---|---|
| Cefquinome Sulfate | 4th gen, animal-only | 118443-89-3 | Cattle, swine, horses; mastitis |
| Ceftiofur Sodium | 3rd gen, animal-only | 104010-37-9 | Cattle and swine respiratory |
| Ceftiofur Hydrochloride | 3rd gen, animal-only | 103988-45-0 | Longer-acting suspension injections |
| Cefepime Hydrochloride | 4th gen, human | 123171-59-5 | Human medicine; not an animal-only API |
Comparison is for reference identification only. Cefquinome is classified as a critically important antimicrobial; use only under veterinary supervision. Related HDM BIO veterinary API pages available.
What Supply Options Are Available?
| Supply Type | Availability |
|---|---|
| Evaluation sample | On request |
| Small batch (1 kg – 25 kg) | Yes |
| Medium-batch production (25 kg – 100 kg) | Yes |
| Tonne-scale bulk supply (100 kg +) | On request |
| Sterile / injectable grade | On request |
| Micronized / custom particle size | On request |
Prices are negotiable based on order quantity.
What Should Buyers Verify Before Purchasing Cefquinome Sulfate?
| Buyer Check | Documentation / Method | Purpose |
|---|---|---|
| Salt Form | COA / TDS | Confirm sulfate (118443-89-3) |
| Assay Basis | Batch COA (HPLC, 270 nm) | Confirm ≥80% as cefquinome |
| HPLC Purity | Related-substances profile | Confirm single ≤1%, total ≤3% |
| 5,6,7,8-Tetrahydroquinoline | Specific-impurity HPLC | Confirm ≤1.0% |
| pH | 10 mg/mL solution | Confirm 1.6–2.6 |
| Water Content | Karl Fischer | Confirm ≤5.0% |
| Solubility | TDS | Confirm formulation aid needed |
| Residue on Ignition | Gravimetric | Confirm ≤0.3% |
| Endotoxin | LAL (injectable) | Confirm <0.10 EU/mg |
| Sterility | Membrane filtration | Confirm injectable grade |
| Particle Size | Laser diffraction | Confirm suspension/injection grade |
| MRL / Withdrawal | Registration dossier | Confirm target-country compliance |
Why Choose HDM BIO?
- Batch documentation provided with every shipment - COA, MSDS and packing list included
- Correct potency basis - Assay reported as cefquinome (≥80%), not a misleading 99% figure
- Two grades - Non-sterile bulk and sterile injectable grade with endotoxin/sterility testing
- Veterinary focus - Formulated for cattle, swine and horse injections and mastitis products
- Direct manufacturer - Office: No.6299 Lanchi Second Road, Xi'an, Shaanxi, China
Storage & Handling
- Storage: 2–8°C, tightly sealed, protected from light and moisture (per CPV)
- Handling: Hygroscopic and slightly water-soluble; keep cold and sealed; use an alkalizing aid when preparing injectable solutions
- Shelf Life: 2 years under 2–8°C sealed storage
- Safety: Veterinary API for formulation/manufacturing. Not for human use; handle as a pharmaceutical chemical
FAQ
Q: What is the MOQ and can I get a sample first?
A: MOQ is 1 kg. Samples are available in both non-sterile and sterile/injectable grades. Contact us to confirm availability.
Q: Can you provide a batch-specific COA?
A: Yes. Batch COA is provided with every shipment, including HPLC purity etc.
Q: What is the typical lead time?
A: We have fresh stock, ready for immediate shipment.
Q: Why is the assay only ~84% and not 99%?
A: Cefquinome sulfate is a salt; the assay is expressed as cefquinome content on an anhydrous basis (CPV requires ≥80%; the theoretical cefquinome fraction is about 84.35%). HPLC chemical purity (single impurity ≤1%, total ≤3%) is reported separately and is typically ≥98%.
Q: Which animals and dosage forms is it used for?
A: It is an animal-only fourth-generation cephalosporin for cattle (respiratory, mastitis, foot disease, calf septicaemia), swine and horses, formulated as 2.5%/5% injections, powder for injection and intramammary infusions.
Q: What about MRLs and withdrawal periods?
A: Cefquinome is a critically important antimicrobial with established MRLs and withdrawal periods in regulated markets. Buyers must confirm destination-country registration, MRLs and withdrawal times and use it only under veterinary prescription.
factory



Certificates


Shipping & Packing

Responsible Antibiotic Use & Registration Support
Cefquinome is a critically important, animal-only antibiotic. We support compliant, veterinarian-directed use and registration:
📋 Registration dossier data - COA, method and impurity (5,6,7,8-tetrahydroquinoline) data for your filing
🌍 MRL & withdrawal support - Documents to help establish target-country MRLs and withdrawal times
🧪 Injectable-grade evidence - Sterility and endotoxin (<0.10 EU/mg) reports for sterile products
🚫 Stewardship commitment - Supplied for licensed veterinary manufacturing; we do not promote non-veterinary or growth-promotion use
[Request Batch COA] [Request Injectable-Grade Sample] [Get Registration Quote]
Included with every shipment:
✓ Batch COA ✓ MSDS ✓ Packing List
Available on request:
✓ HPLC Impurity Report ✓ Endotoxin (LAL) Report ✓ Sterility Report
Whatsapp & Mobile: +86 19991242181
Email: sales@hdmbio.com
Tell us your target species and formulation (injection or mastitis infusion), and we will quote the correct CPV-grade Cefquinome Sulfate Powder with the MRL and registration documentation your market requires.
Hot Tags: cefquinome sulfate powder, China cefquinome sulfate powder manufacturers, suppliers, factory, veterinary granulated ingredient, , , ,
















