Ceftiofur API Manufacturer China | ≥98% Third-Generation Cephalosporin Veterinary Antibiotic CAS 80370-57-6
Key Selling Points
✅ Water-Soluble Sodium Salt - Ready for sterile powder for injection (reconstituted solution)
✅ CPV/USP-Grade Potency - ≥85% ceftiofur (anhydrous), HPLC purity reported separately
✅ Injectable Grade - Sterility and endotoxin (<0.20 EU/mg) testing available
✅ Full Ceftiofur Series - Sodium, hydrochloride and crystalline free acid for short- to long-acting products
What Is Ceftiofur Sodium?
Ceftiofur Sodium Powder is the water-soluble sodium salt of ceftiofur, a third-generation cephalosporin developed solely for veterinary use. It is a broad-spectrum, β-lactamase-stable bactericidal antibiotic that is rapidly metabolized to the active desfuroylceftiofur (DFC). Because it is a sodium salt, potency is expressed as ceftiofur content (≥85% on an anhydrous basis), not as a 99% assay. It is a white to greyish-yellow, hygroscopic powder that dissolves in water.
HDM BIO supplies Ceftiofur Sodium Powder in non-sterile and sterile grades from 1 kg to tonne-scale orders for manufacturers of sterile powder for injection. The ceftiofur hydrochloride and crystalline free acid (CCFA) are also available for longer-acting suspension products.
This is an animal-only veterinary API. It is not for human use and must be prescribed and used under veterinary supervision.
Ceftiofur Sodium Quality Specifications and Batch Documentation
Every batch is tested in HDM BIO's QC laboratory. Batch-specific COA is provided with each shipment.
| Test Item | Specification | Result |
|---|---|---|
| Appearance | White to greyish-yellow, hygroscopic powder | White to greyish-yellow powder |
| Identification | HPLC retention time; sodium flame reaction | Conform |
| Assay (as ceftiofur, anhydrous) | ≥85.0% | 91.0% |
| pH (50 mg/mL) | 5.5 – 7.5 | 6.5 |
| Solution Clarity & Color | Clear; not deeper than Y/OY9 | Complies |
| Total Impurities (HPLC) | ≤3.0% | 1.50% |
| Acetone (Residual Solvent) | ≤2.0% | 0.30% |
| Water Content (KF) | ≤3.0% | 1.80% |
| Bacterial Endotoxin (injectable) | <0.20 EU/mg | 0.10 EU/mg |
| Sterility (injectable) | Complies (membrane filtration) | Complies |
| Particle Size | Customizable on request | Complies |
| Conclusion | The product complies with the requirements | |
What Is Ceftiofur Sodium Used For?
- Cattle: Bovine respiratory disease (where locally registered) and other susceptible bacterial infections
- Swine: Respiratory and systemic bacterial infections
- Horses: Respiratory infections
- Poultry: Early mortality control in day-old chicks and turkeys
- Companion animals: Susceptible infections in dogs and cats
- Dosage form: Sterile powder for injection (reconstituted); the active metabolite desfuroylceftiofur contributes to efficacy
All uses are veterinary indications. Target species, dosing, MRLs and withdrawal periods follow finished-product labels and local regulations (some markets restrict ceftiofur use in cattle).
Ceftiofur Salt Forms: Choose by Dosing Interval
| Salt Form | Solubility | CAS | Dosage Form / Duration |
|---|---|---|---|
| Ceftiofur Sodium | Water-soluble | 104010-37-9 | Powder for injection; short-acting, daily dosing |
| Ceftiofur Hydrochloride | Insoluble in water | 103988-45-0 | Oil suspension; medium-long acting |
| Ceftiofur Crystalline Free Acid (CCFA) | Insoluble | 80370-57-6 | Crystalline suspension; extended interval (e.g. ~7 days) |
| Cefquinome Sulfate (4th gen) | Slightly soluble | 118443-89-3 | Injections / mastitis; 4th-generation alternative |
The sodium salt is the standard for reconstituted powder for injection. Choose HCl or CCFA for long-acting suspensions. Related HDM BIO veterinary API pages available.
What Supply Options Are Available?
| Supply Type | Availability |
|---|---|
| Evaluation sample | On request |
| Small batch (1 kg – 25 kg) | Yes |
| Medium-batch production (25 kg – 100 kg) | Yes |
| Tonne-scale bulk supply (100 kg +) | On request |
| Sterile / injectable grade | On request |
| HCl / CCFA salt form | On request |
Prices are negotiable based on order quantity.
What Should Buyers Verify Before Purchasing Ceftiofur Sodium?
| Buyer Check | Documentation / Method | Purpose |
|---|---|---|
| Salt Form | COA / TDS | Confirm sodium (104010-37-9) |
| Assay Basis | Batch COA (HPLC, 254 nm) | Confirm ≥85% as ceftiofur |
| HPLC Purity | Total-impurities profile | Confirm ≤3.0% |
| pH | 50 mg/mL solution | Confirm 5.5–7.5 |
| Acetone | GC headspace | Confirm ≤2.0% |
| Water Content | Karl Fischer | Confirm ≤3.0% |
| Solubility | TDS | Confirm water-soluble for injection |
| Endotoxin | LAL (injectable) | Confirm <0.20 EU/mg |
| Sterility | Membrane filtration | Confirm injectable grade |
| Active Metabolite | Method/DFC data | Support ceftiofur-equivalent assays |
| MRL / Withdrawal | Registration dossier | Confirm target-country compliance |
| Species Label | Local regulation | Confirm approved species (e.g. cattle) |
Why Choose HDM BIO?
- Batch documentation provided with every shipment - COA, MSDS and packing list included
- Correct potency basis - Assay reported as ceftiofur (≥85%), not a misleading 99% figure
- Water-soluble specialist - The correct sodium salt for sterile powder for injection
- Full salt-form range - Sodium, HCl and CCFA covering short- to long-acting products
- Direct manufacturer - Xi'an HDM Biotech Co., Ltd., No.6299 Lanchi Second Road, Xi'an, Shaanxi, China
Storage & Handling
- Storage: 2–8°C (cold), tightly sealed, protected from light (per CPV)
- Handling: Hygroscopic and water-soluble; keep cold and sealed; reconstitute aseptically for injectable use
- Shelf Life: 2 years under cold sealed storage
- Safety: Veterinary API for formulation/manufacturing. Not for human use
FAQ
Q: What is the MOQ and can I get a sample first?
A: MOQ is 1 kg. Samples are available in non-sterile and sterile/injectable grades. Contact us to confirm availability.
Q: Can you provide a batch-specific COA?
A: Yes. Batch COA is provided with every shipment, including HPLC purity etc.
Q: What is the typical lead time?
A: We have fresh stock, ready for immediate shipment.
Q: Which ceftiofur salt should I choose?
A: Ceftiofur sodium is water-soluble and used for reconstituted powder for injection (short-acting, daily). Ceftiofur hydrochloride is an oil suspension for medium-long action, and crystalline free acid (CCFA) is an extended-interval suspension. Match the salt to your dosage form and dosing interval.
Q: Which animals is it used for?
A: It is an animal-only third-generation cephalosporin used in cattle (where registered), swine, horses, day-old chicks/turkeys and companion animals. Approved species vary by country.
Q: Why is the assay ~91% instead of 99%?
A: The assay is expressed as ceftiofur content on an anhydrous basis (CPV requires ≥85%). HPLC chemical purity (total impurities ≤3%) is reported separately and is typically ≥98%.
factory



Certificates


Shipping & Packing

Pick the Right Ceftiofur Salt for Your Formulation
Tell us your dosage form and desired dosing interval - we will match the salt and provide the correct release documents:
💧 Daily injection / reconstituted powder → Ceftiofur Sodium (water-soluble, 104010-37-9)
🕓 Medium-long acting suspension → Ceftiofur Hydrochloride (103988-45-0)
📆 Extended-interval (~7-day) suspension → Crystalline Free Acid (CCFA) (80370-57-6)
🧪 Injectable-grade evidence → Sterility and endotoxin (<0.20 EU/mg) reports for the sodium grade
[Check the Right Salt] [Request Injectable-Grade Sample] [Get Multi-Salt Quote]
Included with every shipment:
✓ Batch COA ✓ MSDS ✓ Packing List
Available on request:
✓ HPLC Impurity Report ✓ Endotoxin (LAL) Report ✓ Sterility Report
Whatsapp & Mobile: +86 19991242181
Email: sales@hdmbio.com
Send your target species, dosage form and dosing interval, and we will recommend the matching water-soluble Ceftiofur Sodium Powder (or the HCl/CCFA long-acting salt) with the CPV/USP documentation your market requires.
Hot Tags: ceftiofur powder, China ceftiofur powder manufacturers, suppliers, factory, veterinary granulated ingredient
















