Home / Products / Peptides / Details
video
Pentapeptide-18 Powder

Pentapeptide-18 Powder

CAS Number: 64963-01-5
Molecular Formula: C29H39N5O7
Molecular Formula: 569.65
EINECS: 265-291-0
Appearance: White to off white powder
Specification: 98% min
Test Method: HPLC
MOQ: 1g
Sample: Available
Stock: Fresh Stock
Storage: Cool Dry Place
Shelf Life: 2 Years Proper Storage
Service: OEM&ODM Service
Certificate: COA,GMP,ISO,HACCP
Payment Method: Bank Transfer,Western Union
Shipping: Dedicated line, courier, air & sea freight

Product Introduction

CAS 64963-01-5 Pentapeptide-18 powder | Enkephalin-Like Peptide Specialist | ≥98% HPLC

Core Selling Points

✅ Alias names reconciled on the COA - Pentapeptide-18, Leuphasyl and Pentapeptide-3 mapped to one sequence per lot

✅ D-Ala2 spot-check isolated on the identity record - position 2 separated from the all-L substitution a routine purity screen can miss

✅ Free-acid chain stated plainly - free Tyr N-terminus and Leu-OH acid, no N-cap and no C-amide

✅ DMSO/DMF diluent note ships with the vial - limited solubility direction passed over before the bench reconstitution

What Is Pentapeptide-18 Powder?

As received, this five-residue chain is a white to off-white solid that only takes up a little DMSO or DMF; plain water alone does not give a clear solution. Because the chain is short and compact, weighing and diluent choice have to account for that limited solubility before the vial goes onto an assay.

Pentapeptide-18 Powder carries the sequence H-Tyr-D-Ala-Gly-Phe-Leu-OH (YAGFL), formula C₂₉H₃₉N₅O₇, MW 569.65. Position 2 is D-Ala, the N-terminus is a free Tyr amine and the C-terminus is Leu-OH free acid. Cosmetic catalogues also reference the same chain as Leuphasyl or Pentapeptide-3, and the lot record lists those names against the matching sequence.

A 1 g vial opens the order; anything above gram scale is quoted against the planned prototype. The material reaches the bench as a cosmetic-formulation R&D input, and finished-product work is carried out on the buyer's side.

Why Buyers Choose HDM BIO for Pentapeptide-18 Powder

  • Alias names tied to one sequence before dispatch - the COA reconciles Pentapeptide-18, Leuphasyl and Pentapeptide-3, so the buyer's dossier does not carry two names that point apart
  • Stereochemistry isolated for a short chain - D-Ala2 appears on the identity record, where an all-L substitution would otherwise slip past a purity-only check
  • Terminal groups stated without a brochure shortcut - free amine and free acid, with no acetyl cap or carboxamide, matching the chain actually shipped
  • Solubility direction on the lot sheet - the DMSO/DMF note travels with the vial instead of being rediscovered on the bench
  • Small-lot account at the Xi'an line - 1 g packs and document support for small formulation teams, with no bulk-only minimum

Order Tiers

Pack Best Fit Timing
1 g research vial Identity check and solvent screening From stock
5 g – 10 g batch Prototype trials and method setup 7–15 working days
25 g – 100 g Repeat formulation runs Quoted to order
Private-label pack Custom labelled research packs On request

Prices are negotiable based on order quantity.

What to Check on the Batch COA

Recorded on COA What It Confirms
Sequence readout Five-residue chain matches YAGFL; no truncation
Stereochemistry D-Ala2 distinguished from the L-Ala2 form
Terminal groups Free Tyr N-terminus; Leu-OH free acid
Purity window HPLC ≥98.0% against the assay method
Net peptide weight Peptide content after acetate and water
Moisture Karl Fischer water reading on the lot
Counterion Acetate level within the reference range

Quality Specifications and Batch Documentation

Every batch passes the QC panel in HDM BIO's peptide laboratory, and the matching COA travels with the delivered vials.

Test Item Specification Result
Appearance White to off-white solid White to off-white solid
Sequence (LC-MS) Matches H-Tyr-D-Ala-Gly-Phe-Leu-OH Conform
D-Ala2 Configuration D-Ala at position 2 Conform
HPLC Purity ≥98.0% 98.4%
Peptide Content 80.0–95.0% 84.1%
Water (Karl Fischer) ≤8.0% 3.8%
Acetate Content ≤12.0% 8.6%
Residual Solvents Meets ICH Q3C Complies
Conclusion The product complies with the requirements Pass

Raw Material Reference Comparison

 

Raw Material CAS Reference
Pentapeptide-18 64963-01-5 Synthetic cosmetic pentapeptide research raw material
Elamipretide 736992-21-5 Synthetic tetrapeptide research raw material
Taspoglutide 275371-94-3 Modified 30-residue synthetic peptide research raw material
Thymosin Beta-4 77591-33-4 Synthetic 43-residue linear peptide research raw material

This table is for raw-material identification reference only.

What Is Pentapeptide-18 Powder Used For?

Formulation and research teams put Pentapeptide-18 Powder to work across the following R&D scenarios:

  • Reference input for cosmetic prototype formulation work
  • Five-mer sequence and stereochemistry comparison samples
  • Diluent screening in DMSO and DMF
  • Benchmark lot for analytical method setup

All descriptions refer to raw-material and research-reagent use only. Any downstream application stays with the buyer under local regulations.

Storage & Handling

  • Store sealed and dry at −20°C; keep the vial away from moisture ingress
  • Keep the container in the dark; light-protected packaging guards against light exposure
  • Bring the sealed vial to ambient temperature before opening to limit condensation
  • Once dissolved, use the portion in the same session; leftover solution is not frozen and thawed again
  • Cosmetic R&D raw material; finished formulation and any downstream use remain the buyer's responsibility

FAQ

Q: Is there a pack below bulk gram level?

A: The smallest pack is a 1 g research vial, shipped with its own COA.

Q: Can the QC file be read before an order is placed?

A: The current-lot COA and LC-MS trace are released on request ahead of purchase.

Q: How fast does stock move after confirmation?

A: Fresh-stock vials move on confirmation under −20°C export packing.

Q: Why do some catalogues list the same chain as Pentapeptide-3?

A: Pentapeptide-3 is the older INCI reference for this sequence; the lot record matches both names to H-Tyr-D-Ala-Gly-Phe-Leu-OH.

Q: Which stereochemistry sits at position 2?

A: Position 2 is D-Ala; the identity record separates it from the L-Ala2 form.

Q: Does the chain end in a carboxamide?

A: Standard supply is Leu-OH free acid; the amidated variant can be quoted on request.

Factory

Peptide synthesis line producing Pentapeptide-18 Powder, HDM BIO Xi'an

LC-MS sequence check for Pentapeptide-18 Powder, HDM BIO QC

Sealed vials of Pentapeptide-18 Powder prepared for cold-chain export, HDM BIO

Certificate

ISO 9001 quality certificate for Pentapeptide-18 Powder manufacturer, HDM BIO Controlled peptide production document for Pentapeptide-18 Powder, HDM BIO

Shipping & Packing

Refrigerated vial packing for Pentapeptide-18 Powder export shipment, HDM BIO

Send Your Spec - We Confirm the Matching Lot

Share the gram amount and any COA line your dossier must carry, such as the D-Ala2 configuration or the free-acid terminus. Lot number, pricing and document set return the same day. Stock vials ship under −20°C packing; larger gram scales follow incoming QC.

[Request 1 g Vial] [Request Batch COA] [Get Gram-Scale Quote]

COA and MSDS are inside every parcel; the HPLC trace and LC-MS record attach ahead of shipment on request.

WhatsApp: +86 19991242181

Email: sales@hdmbio.com

The Xi'an line supplies the cosmetic peptide raw material; prototype and finished-product decisions stay with your team. Contact HDM BIO for Pentapeptide-18 Powder.

Hot Tags: pentapeptide-18 powder, China pentapeptide-18 powder manufacturers, suppliers, factory, Octreotide Powder, , , ,

Send Inquiry

whatsapp

Phone

E-mail

Inquiry

Bag