Taspoglutide Powder CAS 275371-94-3 | GMP Peptide Manufacturer China | Long-Acting GLP-1 Analog Supplier
Core Selling Points
✅ Both Aib positions mapped on the LC-MS trace - chain position 2 and position 29 carry α-aminoisobutyric acid, not the native residue
✅ Arg-NH₂ C-terminus documented - amidated end confirmed per lot, not a free-acid chain
✅ 30-mer chain length locked by mass - no terminal truncation on the released lot
✅ 1 g entry vial, light-protected export - evaluation pack sized for initial bench work
What Is Taspoglutide Powder?
Under the catalogue references BIM-51077, ITM-077 and R-1583, this 30-mer is a modified 7-36 chain carrying two α-aminoisobutyric acid residues and an amidated C-terminal arginine. The two Aib positions are the main identity question on receipt: a plain native chain without them reads as a different reference material on the mass spectrum.
Taspoglutide Powder ships as a white to beige lyophilized solid, sequence H-His-Aib-Glu-Gly-Thr-Phe-Thr-Ser-Asp-Val-Ser-Ser-Tyr-Leu-Glu-Gly-Gln-Ala-Ala-Lys-Glu-Phe-Ile-Ala-Trp-Leu-Val-Lys-Aib-Arg-NH₂, molecular formula C₁₅₂H₂₃₂N₄₀O₄₅, MW 3339.71, acetate salt. It dissolves more readily in DMSO than in plain water; the COA records the recommended diluent direction.
The entry pack is 1 g per vial; larger gram scales are quoted per project. Laboratory research reagent - formulation development and finished-product work remain with the buyer's team.
Why Buyers Choose HDM BIO for Taspoglutide Powder
- Trial vial sized for a 30-mer - first order stays at 1 g; no drum commitment before the reference check
- Aib substitutions on the mass record - both non-standard residues appear on the LC-MS report, not folded into the product name
- Amidated terminus stated on the COA - Arg-NH₂ confirmed against the free-acid alternative
- Diluent guidance attached - DMSO preference and reconstitution direction noted for the bench
- Factory account in Xi'an - Xi'an HDM Biotech Co., Ltd., No.6299 Lanchi Second Road, Xi'an, Shaanxi, China
Order Tiers
| Order Tier | Who It Suits | Typical Lead Time |
|---|---|---|
| 1 g vial | Reference check and first solubility trial | Fresh stock |
| 5 g – 10 g | Assay and method setup | 7–15 days |
| 50 g and above | Ongoing research supply | Quoted per order |
| Bespoke vial / label | Private-label research packs | On request |
Prices are negotiable based on order quantity.
What to Check on the Batch COA
| Buyer Check | Why It Matters to Your Project |
|---|---|
| Sequence (LC-MS) | 30-residue mass matches the listed chain; truncation absent |
| Aib at positions 2 and 29 | Both non-standard substitutions confirmed against native residues |
| C-terminal amide | Arg-NH₂ present, not a free-acid terminus |
| HPLC purity (≥98.0%) | Impurity window for your assay method |
| Oxidized Trp25 | Light-sensitive residue tracked over shelf life |
| Peptide content | Net peptide weight after acetate and water |
| Water (Karl Fischer) | Keeps the lyophilized spec honest |
Quality Specifications and Batch Documentation
Every batch passes the QC panel in HDM BIO's peptide laboratory, and the matching COA travels with the delivered vials.
| Test Item | Specification | Result |
|---|---|---|
| Appearance | White to beige lyophilized powder | White to beige lyophilized powder |
| Sequence (LC-MS) | Matches H-His-Aib-EGTFTSDVSSYLEGQAAKEFIAWLVK-Aib-Arg-NH₂ | Conform |
| Aib Positions | Aib at 2 and 29 | Conform |
| HPLC Purity | ≥98.0% | 98.3% |
| Peptide Content | 80.0–95.0% | 84.1% |
| Oxidized Trp | ≤3.0% | 1.6% |
| Water (Karl Fischer) | ≤8.0% | 4.0% |
| Residual Solvents | Meets ICH Q3C | Complies |
| Conclusion | The product complies with the requirements | Pass |
Raw Material Reference Comparison
| Raw Material | CAS | Reference |
|---|---|---|
| Taspoglutide | 275371-94-3 | Modified 30-residue synthetic peptide research reagent |
| Exenatide | 141758-74-9 | Synthetic peptide research raw material |
| Buserelin | 57982-77-1 | 9-mer linear synthetic peptide research raw material |
| Nesiritide | 114471-18-0 | Cyclic 32-residue synthetic peptide research raw material |
This table is for raw-material identification reference only.
What Is Taspoglutide Powder Used For?
Research teams put Taspoglutide Powder to work across the following R&D scenarios:
- Aib-substituted peptide reference and identity bench work
- DMSO-based reconstitution and diluent screening
- Research programme supply for cell-based peptide studies
- Analytical reference material comparison
All descriptions refer to research-reagent use only. Any downstream application stays with the buyer under local regulations.
Storage & Handling
- Store sealed and desiccated at −20°C; keep away from moisture
- Wrap the vial in amber foil; Trp25 degrades under prolonged light
- Bring the vial to room temperature before opening to limit condensation
- Reconstituted portions should be used promptly; repeated freeze-thaw cycles are avoided
- Laboratory research reagent only; dosing decisions stay outside this supply
FAQ
Q: What entry pack size can you release?
A: The entry pack is 1 g per lot, one vial with its own COA.
Q: Can the current-lot COA be reviewed before I commit?
A: Yes. The batch COA and LC-MS record are available on request before ordering.
Q: How soon after confirmation does a 1 g pack leave the warehouse?
A: Fresh-stock vials ship on confirmation under light-protected export.
Q: Which two positions carry the Aib residues?
A: Aib sits at chain position 2 and position 29; the LC-MS report confirms both.
Q: Is the C-terminus amidated?
A: Standard supply is Arg-NH₂ carboxamide; the free-acid alternative is quoted on request.
Q: Which diluent works best for reconstitution?
A: DMSO gives the better solubility; plain-water solubility is limited. The recommended direction is noted on the COA.
Factory



Certificate

Shipping & Packing

Need the Aib-Specified Lot for Your Method? Send Your Reference - We Match the Chain
Share the chain reference your bench follows and the gram amount you are evaluating with. Our team checks the two Aib positions and the Arg-NH₂ terminus against that reference, then replies with the matching lot, pricing and document set. Fresh-stock vials move on confirmation; larger scales follow after incoming QC.
[Request 1 g Vial] [Request Batch COA] [Get Gram-Scale Quote]
COA and MSDS travel inside each parcel; the HPLC trace and LC-MS record can be sent ahead on request.
WhatsApp: +86 19991242181
Email: sales@hdmbio.com
Our supply is the lyophilized 30-mer reference; assay setup and any formulation steps stay with your team. Contact HDM BIO for Taspoglutide Powder.
Hot Tags: taspoglutide powder, China taspoglutide powder manufacturers, suppliers, factory, 17α-Estradiol, Octreotide Powder, , ,
















