Home / Products / Peptides / Details
video
Tesamorelin Powder

Tesamorelin Powder

CAS Number: 218949-48-5
Molecular Formula: C221H366N72O67S
Molecular Weight: 5135.86
EINECS: 603-809-2
Appearance: White to off white powder
Specification: 98% min
Test Method: HPLC
MOQ: 1g
Sample: Available
Stock: Fresh Stock
Storage: Cool Dry Place
Shelf Life: 2 Years Proper Storage
Service: OEM&ODM Service
Certificate: COA,GMP,ISO,HACCP
Payment Method: Bank Transfer,Western Union
Shipping: Dedicated line, courier, air & sea freight

Product Introduction

Bulk Tesamorelin Powder | 44-Mer Amidated Peptide, Hexenoyl Cap Verified, Batch COA – CAS 218949-48-5

Core Selling Points

  • Position 1 is not a free amine: the trans-3-hexenoyl cap is confirmed on the mass report, and material showing the bare-amine mass is held back from release.
  • Your purchase order and your COA can carry different identifiers for one chain - CAS 218949-48-5 at 5135.86 g/mol for the free peptide, CAS 901758-09-6 near 5195.96 g/mol for the acetate - so the salt on the vial decides which one applies.
  • End-group checks travel with the certificate: mass data for the Tyr1 acyl cap, a separate Leu-NH₂ confirmation, and a Met27 oxidation result your team can set its own limit on.
  • Verification comes before volume: a single vial is enough to confirm cap, amide and mass in your own lab, and larger quantities follow only after those three results match.

 

What Is Tesamorelin Powder?

 

Tesamorelin Powder is the synthetic linear 44-mer Hexenoyl-YADAIFTNSYRKVLGQLSARKLLQDIMSRQQGESNQERGARARL-NH₂, formula C221H366N72O67S and manufacturer-listed molecular weight 5135.86 g/mol, supplied as the acetate salt in white to off-white lyophilized form. It is the research designation TH9507, also catalogued as Modified GRF(1-44), and it is a research reagent for laboratory use only.

 

Two end modifications separate this 44-mer from the native GRF(1-44) sequence, and both are easy to lose in a catalogue listing. An acyl group sits on the N-terminal tyrosine and an amide closes the C-terminal leucine; a lot missing either one has a different mass and belongs to a different reference item, even when its purity figure looks identical. Xi'an HDM Biotech Co., Ltd. has operated its own peptide line since 2012 and prints the cap, the amide and the oxidation figure on the certificate, so a buyer comparing offers at this chain length is comparing which modifications the supplier is willing to put in writing.

 

Why Choose HDM BIO for Tesamorelin Powder?

 

A modified 44-mer is judged on its ends as much as its purity. These are the five points buyers raise before this lot is released, and the answer HDM BIO gives to each.

  • Consistent end modifications lot to lot

    Every lot is checked for the capped Tyr1 mass and the Leu-NH₂ terminus before it ships, letting your lab hold a repeat vial against the material it first approved. Batch-to-batch consistency on a modified peptide starts with both ends documented, not with a catalogue name.

    Two identifiers, one agreed order

    The free-peptide record and the acetate record describe the same chain but carry different CAS numbers and masses. Your purchasing and quality teams can quote and clear the same item because the salt form is stated beside the identifier on the quotation.

    End groups printed on the mass report

    The LC-MS report shows the hexenoyl cap and confirms the C-terminal amide, so incoming inspection checks the structure you specified rather than trusting a purity percentage. Bare-amine material is rejected before release.

    A single vial before the gram commitment

    The 1 g entry pack keeps the first purchase small while your lab checks the cap mass, the amide and the documents in its own system. Larger quantities follow the lot you approved, not a substitute listing.

    Reporting and packs shaped to your assay

    COA, full HPLC trace, LC-MS modification report, MSDS and a technical data sheet support incoming inspection and supplier qualification. Need a different vial format, a private label or a reporting layout that fits your system? Those details are agreed at enquiry, and repeat or contract quantities come from the same manufacturer line.

 

Which Molecule Is Actually in the Vial?

 

Four names circulate around this compound and only three describe the same chain. Confirming the identifier before a purchase order is written avoids paying for one reference material and receiving another.

Name What It Is Same Item?
Tesamorelin / TH9507 44-residue GRF(1-44) analogue with an N-terminal trans-3-hexenoyl group and a C-terminal amide Yes - the intended item
Modified GRF(1-44) Descriptive name for the same capped, amidated 44-mer Yes
Sermorelin GRF(1-29)-NH₂, a shorter 29-residue fragment without the hexenoyl cap No - different chain length
Tesofensine A small-molecule compound, not a peptide No - different molecule class
The shared "-morelin" ending is a naming stem, not an identity guarantee. The mass report and the CAS on the COA settle the question; the shorthand on a listing does not.

What a Missing Cap Looks Like on the Mass Report

 

The hexenoyl group is the only structural change at position 1, so its absence is measurable rather than a matter of interpretation. A deconvoluted mass near 5039.7 Da points to peptide without the cap, about 96.1 Da below the intended chain.

Position Expected on This Lot If It Is Missing Test That Catches It
Tyr1 trans-3-hexenoyl cap, capped amine mass Bare-amine chain near 5039.7 Da, about 96.1 Da low LC-MS cap mass, checked before release
Leu44 Carboxamide, Leu-NH₂ Free-acid terminus, a different catalogue item C-terminus line on the COA
Whole chain 44 residues, no terminal truncation Mass gap and a different reference material Full-length LC-MS map
Met27 Oxidation tracked per lot Oxidized species near +16 Da on the same chain Oxidized Met reported as its own COA row

 

Free Peptide, Acetate Salt and the Number on the Label

 

Two registry entries and two molecular weights are used for this peptide. The difference is one acetic acid, and knowing which basis the certificate uses keeps a gram-to-mole calculation from drifting by about 60 g/mol.

Field Free Peptide Acetate Form (standard supply)
CAS number 218949-48-5, used on the HDM BIO listing 901758-09-6, used in public supplier listings
Molecular formula C221H366N72O67S C223H370N72O69S
Molecular weight 5135.86 g/mol (HDM BIO); about 5135.9 in public records About 5195.96 g/mol
Difference Baseline chain +C2H4O2, roughly 60 g/mol
What the mass report shows Deconvoluted mass near 5135.9 Da Also near 5135.9 Da - the acetate counter-ion is not observed by ESI-MS

A label at 5195.9 g/mol and a mass report at 5135.9 Da can both be correct for the acetate salt. Fix the salt form and the weighing basis on the order before comparing prices.

 

Batch COA - Published Release Values

 

 

Tesamorelin Powder is checked lot by lot in HDM BIO's peptide laboratory. Below are the published results for the listed lot; request the certificate matching your own lot number when a trial order is placed.

Test Item Specification Published Result
Appearance White to off-white lyophilized powder White to off-white lyophilized powder
Sequence (LC-MS) Matches Hexenoyl-YADAIFTNSYRKVLGQLSARKLLQDIMSRQQGESNQERGARARL-NH₂ Conform
N-terminal cap trans-3-hexenoyl on Tyr1 Conform
C-terminus Carboxamide, Leu-NH₂ Conform
HPLC purity 98.0% minimum 98.2%
Peptide content 80.0–95.0% 83.8%
Oxidized Met 3.0% maximum 1.5%
Water (Karl Fischer) 8.0% maximum 4.2%
Residual solvents Meets ICH Q3C Complies
Conclusion The product complies with the requirements

From a 1 g Vial to Bulk Supply

 

Order tiers follow the stage of the programme: a first vial for cap and amide verification, gram quantities for method development, and larger packs for extended work. Prices are negotiated against quantity.

Order Tier Who It Suits Typical Lead Time
1 g vial Initial cap and amide verification In stock
5 g – 10 g Method development Within 7–15 days
50 g and above Extended research programme Quoted per order
Custom vial size / label Private-label research supply On request

Research Use and Handling

 

  • Supplied as a research reagent for laboratory use only; not for human or veterinary administration.
  • Keep vials at 2–8°C for short-term use and at -20°C for longer holding, sealed and protected from light.
  • Minimize freeze-thaw cycles after reconstitution.
  • Confirm the salt form, the CAS and the mass basis on the certificate where weighing accuracy matters to your protocol.
  • Any downstream formulation work stays with the buyer under local regulations.

 

FAQs

 

Q: Can I order as little as 1 g for a first modification check?

A: Yes. The MOQ is 1 g per lot, sealed in a single vial with its own COA.

Q: How do I confirm the N-terminal hexenoyl group is present?

A: The LC-MS report on request shows the capped Tyr1 mass. Bare-amine material is rejected before release.

Q: Is the C-terminus free acid or amidated?

A: Standard supply is Leu-NH₂ carboxamide. Free-acid C-terminus is quoted on request.

Q: Does your COA report Met27 oxidation separately?

A: Yes. Oxidized Met appears on its own COA row (spec ≤3.0%) alongside the purity result.

Q: Is this peptide supplied as acetate?

A: Standard supply is acetate; the acetate content is stated on the COA.

Q: How quickly does a 1 g vial ship?

A: Fresh stock goes out immediately under cold-chain export.

 

Factory

Tesamorelin Powder peptide synthesis laboratory, HDM BIO

Tesamorelin Powder QC laboratory LC-MS end-modification verification, HDM BIO

Sealed lyophilized vial packing of Tesamorelin Powder for cold-chain export

Certificate

ISO 9001 quality certificate for Tesamorelin Powder manufacturer, HDM BIO Controlled peptide production document for Tesamorelin Powder, HDM BIO

Shipping & Packing

Cold-chain export packing of Tesamorelin Powder lyophilized vials, HDM BIO

Confirm the Cap and the Salt Before a Quote

 

Two catalogue identities sit behind one chain, and the gap between them is a single acetic acid. Ordering this 44-residue analogue means fixing the salt form and the mass basis before offers are compared: the free-peptide entry (CAS 218949-48-5, C221H366N72O67S, 5135.86 g/mol) and the acetate entry (CAS 901758-09-6, C223H370N72O69S, about 5195.96 g/mol) both describe Tesamorelin Powder. HDM BIO supplies the acetate form for laboratory research only.

 

Check the cap mass · Confirm the salt form · Quote a 44-mer vial

 

WhatsApp: +86 19991242181

Email: sales@hdmbio.com

Hot Tags: tesamorelin powder, China tesamorelin powder manufacturers, suppliers, factory, Octreotide Powder, , , ,

Send Inquiry

whatsapp

Phone

E-mail

Inquiry

Bag