Tetracosactide Powder CAS 16960‑16‑0 | High Purity ACTH (1‑24) 24‑Mer Research Peptide Supplier China
Core Selling Points
- Cosyntropin, Tetracosactrin and ACTH(1-24) all name this one 24-residue chain - CAS 16960-16-0 is written on the quotation, not a catalogue nickname.
- HPLC purity and net peptide content appear on separate COA lines - compare quotes on the same basis before treating 98% and 99% as the same material.
- Oxidized Met and the Trp colour check are released with the lot record - the two failure points on this chain are checked before the vial leaves QC.
- A 1 g vial comes first - specification, packing and document list are fixed on the trial lot before bulk supply is discussed.
What Is Tetracosactide Powder?
Tetracosactide Powder is the synthetic linear 24-mer H-Ser-Tyr-Ser-Met-Glu-His-Phe-Arg-Trp-Gly-Lys-Pro-Val-Gly-Lys-Lys-Arg-Arg-Pro-Val-Lys-Val-Tyr-Pro-OH, supplied as the acetate salt with molecular formula C136H210N40O31S, molecular weight 2933.44 g/mol and CAS 16960-16-0. It is a white to slightly yellowish lyophilized solid, and the sequence SYSMEHFRWGKPVGKKRRPVKVYP is confirmed by LC-MS on every lot. The material is a research reagent for laboratory use only.
For a purchasing decision, the name on the catalogue is only the starting point: buyers qualify this peptide by the CAS and synonym set, the stated chain length, the salt form, the four separate composition figures on the COA and a supplier able to hold that specification across repeat lots. Solid-phase synthesis and HPLC purification run on Xi'an HDM Biotech Co., Ltd.'s own peptide line, a manufacturer operating since 2012; trial vials are packed light-protected, and a batch-specific COA, MSDS and technical data sheet travel with each shipment.
Why Choose HDM BIO for Tetracosactide Powder?
Four names, several CAS numbers and a "99% purity" line can all point to the same vial. A supplier's job is to turn that into specifications your team can approve and re-order with confidence. Here is how we remove each doubt.
One identity on every purchase order
Cosyntropin, Tetracosactrin and ACTH(1-24) describe the same 24-residue chain, yet listings attach different CAS numbers to it. Quoting CAS 16960-16-0 with the synonym set and the full sequence together lets you order and receive the same material.
Consistent lots, checked before dispatch
Met4 and Trp9 fail first on this chain, so batch-to-batch drift is the risk that matters most. Oxidized Met and the Trp colour check are released as separate COA lines, letting your lab flag a drifting lot before it enters a run.
Four composition figures, one certificate
A "99% purity" claim means little while peptide content, acetate and water sit on a different page. Reporting all four together supports a fair supplier comparison and clean molar calculations on receipt.
A sample vial before bulk supply
Qualifying a long peptide on a large first order puts the cost on your side. Request a 1 g sample to confirm the specification, sequence record and documentation in your own lab before commercial quantities are committed.
Documents and supply shaped to your application
Supplier qualification needs the COA, HPLC and LC-MS data, MSDS and a technical data sheet - all shipped with the order. Vial size, packaging and analytical records can be discussed for your application, with repeat bulk orders and OEM/ODM supply from the manufacturer.
Tetracosactide, Cosyntropin or ACTH(1-24) - Which One Are You Buying?
The same peptide is listed under several names and more than one CAS number. A purchase order that carries only one of them can easily land a different salt or a differently specified material. Settle the identity in writing first.
| Name on Quotation | What It Refers To | What to Confirm |
|---|---|---|
| Tetracosactide / Tetracosactide Acetate | The acetate salt of the 24-residue chain | CAS 16960-16-0, acetate stated, net peptide content stated |
| Cosyntropin / Tetracosactrin | Common synonyms for the same ACTH(1-24) sequence | Ask the supplier to confirm the synonyms in writing, not by catalogue title |
| ACTH(1-24) / alpha1-24-Corticotropin | The 24-residue sequence designation | Full sequence SYSMEHFRWGKPVGKKRRPVKVYP and residue count of 24 |
| Other CAS numbers seen in listings | Salt-form or catalogue variants | Require the CAS on the COA to match the CAS on the purchase order |
"99% Purity" Is Not the Same as 99% Peptide
Listings for this peptide quote 98%, 99% or "99% min" purity, while peptide content is published anywhere from above 80% to above 90%, with acetate and water reported as separate figures. Those numbers describe different things. Read the COA lines before assuming two quotes describe the same vial.
| COA Line | What It Tells You | Why a Buyer Needs It |
|---|---|---|
| HPLC purity | Share of the main peptide peak among peptide-related impurities | A high value can still sit beside a low net peptide content |
| Peptide content | Actual peptide mass in the vial after acetate and water | This is the figure that drives molar calculations |
| Acetate content | Counter-ion remaining from salt formation | Explains part of the mass that is not peptide |
| Water (Karl Fischer) | Residual moisture in the lyophilized solid | Affects weighing, storage stability and shelf life |
| Oxidized Met / Trp check | Degradation markers on a Met- and Trp-containing chain | Flags a lot that has aged or been exposed to light |
Ask the supplier to state purity, peptide content, acetate and water on the same certificate. A single purity percentage is not enough to compare two offers.
Batch COA - Example Release Values
Tetracosactide Powder is tested lot by lot in HDM BIO's peptide laboratory, and the certificate matching your lot travels with the shipment. The figures below show the reporting format for this 24-mer; your vial carries the measured values of its own batch.
| Test Item | Specification | Result |
|---|---|---|
| Appearance | White to slightly yellowish lyophilized powder | Conforms |
| Sequence (LC-MS) | Matches SYSMEHFRWGKPVGKKRRPVKVYP | Conforms |
| HPLC purity | 98.0% min | 98.4% |
| Peptide content | 80.0–95.0% | 84.9% |
| Oxidized Met | 3.0% max | 1.6% |
| Water (Karl Fischer) | 8.0% max | 4.0% |
| Residual solvents | Meets ICH Q3C | Complies |
| Conclusion | The product complies with the requirements | |
Batch COA and MSDS are packed inside every shipment. The full HPLC trace and the sequence record are attached on request.
From Trial Vial to Repeat Bulk Supply
The first vial is checked against the agreed specification: appearance, LC-MS sequence, HPLC purity, peptide content, acetate, water and the oxidation markers. Holding the vial type, light protection and document list constant at this stage is what makes a later bulk lot match the material that was approved.
Inquiry → Identity & COA Review → 1 g Trial Vial → In-house Check → Bulk Supply
Research Use and Handling
- Supplied as a research reagent for laboratory use only; not for human or veterinary administration.
- Store lyophilized vials at -20°C, protected from light; keep the amber or foil wrap in place until use.
- Minimize freeze-thaw cycles after reconstitution and prepare solutions fresh for analytical work.
- Any downstream formulation or finished-product work remains with the buyer under local regulations.
FAQ
Q: How can I verify product quality before ordering?
A: We provide a complete COA with HPLC, LC-MS, NMR, GC and UV test data. All products comply with USP, EP and CP standards, and third-party testing is fully supported. For this peptide, ask specifically for the peptide content, acetate and water lines alongside the HPLC purity figure.
Q: Do you accept trial orders?
A: Yes. Small trial orders are welcome for quality assessment before bulk purchase. A 1 g vial is the usual starting pack for this 24-mer, and the specification agreed on the trial lot is carried into later supply.
Q: Can I get free samples?
A: Most products support free samples. Clients only cover shipping cost. You can apply via inquiry form or official email, and state whether the LC-MS sequence record should be included with the sample COA.
Q: How do you keep batch quality stable?
A: Every batch is strictly tested to ensure stable purity and consistent batch quality. On this chain the oxidized Met and Trp colour checks are reported as their own COA lines, so a drifting lot can be identified before the vial ships rather than at your bench.
Q: What is your packaging and storage standard?
A: Standard packing is 1 kg foil bag plus carton, or 25 kg drum with double PE bags, and custom packaging is available. Research peptides are shipped light-protected; store lyophilized material at -20°C away from light and minimize freeze-thaw cycles after reconstitution.
Q: What payment terms do you accept?
A: We support secure global payment methods: Bank Transfer and Western Union.
Q: What is your shipping lead time?
A: In-stock items ship within 1-3 working days. Lead time for customized orders is negotiable. We also provide full customs documents and clearance guidance for cross-border research supply.
Q: What is your quality guarantee policy?
A: Quality is always our priority. We offer full quality assurance. Verified quality issues qualify for free replacement or full refund.
Factory & Quality Control



Certificate

Shipping & Packing

Tell Us Which Name Is on Your Purchase Order
Send the CAS, the synonym your team uses and the gram amount, and our team returns the matching COA with purity and peptide content shown separately, a sample quote and a bulk price for Tetracosactide Powder. Trial quantities, flexible MOQ and OEM ODM arrangements can be organized directly with the manufacturer.
Request 1 g Vial · Request Batch COA · Get Gram-Scale Quote
WhatsApp: +86 19991242181
Email: sales@hdmbio.com
The 24-mer vial leaves our line light-protected; assay design and downstream work stay on your bench. Write to us for Tetracosactide Powder.
Hot Tags: tetracosactide powder, China tetracosactide powder manufacturers, suppliers, factory, Octreotide Powder, , , ,
















