Home / Products / Peptides / Details
video
Dipeptide-2 Powder

Dipeptide-2 Powder

CAS Number: 24587-37-9
Molecular Formula: C16H21N3O3
Molecular Weight: 303.36
Appearance: White to off white powder
Specification: 98% min
Test Method: HPLC
MOQ: 1g
Sample: Available
Stock: Fresh Stock
Storage: Cool Dry Place
Shelf Life: 2 Years Proper Storage
Service: OEM&ODM Service
Certificate: COA,GMP,ISO,HACCP
Payment Method: Bank Transfer,Western Union
Shipping: Dedicated line, courier, air & sea freight

Product Introduction

Dipeptide-2 powder (CAS 24587-37-9) | High-Stability Anti-Edema & Lymphatic Drainage Peptide | ≥98% HPLC

Core Selling Points

  • Know exactly which molecule you are ordering: CAS 24587-37-9 and the H-Val-Trp-OH sequence are stated on the quotation, not hidden behind a trade name.
  • Mass spectrometry checks the 303.36 g/mol molecular weight against C16H21N3O3 before any lot is released.
  • Every shipment carries an HPLC assay and a batch-specific COA, so the lot you approve is the lot that arrives.
  • Need a smaller first commitment? Trial quantities, flexible MOQ and OEM/ODM support let you qualify the supply before scaling up.

What Is Dipeptide-2 Powder?

Dipeptide-2 Powder is a synthetic dipeptide assembled from valine and tryptophan, listed under the INCI name Dipeptide-2 with the sequence H-Val-Trp-OH. Its CAS number is 24587-37-9, its molecular formula is C16H21N3O3 and its molecular weight is 303.36 g/mol. The powder is water soluble and is supplied to cosmetic formulators who need a documented peptide identity, a defined specification and batch-level test records.

Xi'an HDM Biotech Co., Ltd. (HDM BIO), established in 2012, manufactures this ingredient under GMP by solid-phase peptide synthesis with HPLC purification and MS identity confirmation. Each shipment carries a batch-specific COA, MSDS and technical data sheet, with sample evaluation available before bulk purchasing.

Why Source Dipeptide-2 From HDM BIO?

Four points matter to a buyer of this ingredient: an unambiguous sequence, a matching molecular formula, test data for each lot and a supplier that supports small trials before commercial volumes.

  1. Sequence Stated Up Front. The Val-Trp sequence and CAS number are declared on the quotation, not left to a trade name.
  2. Identity Verified by MS. Mass spectrometry confirms the molecular weight against the declared formula.
  3. Documentation Ready For Review. COA, TDS, MSDS and test reports are supplied for supplier qualification.
  4. Volume Flexibility. Milligram-scale evaluation, trial quantities and repeat bulk orders are supported, with OEM and ODM options.

Val-Trp or Val-Tyr? Confirming the Sequence Before You Order

Supplier listings do not use one consistent label for Dipeptide-2. Some write the sequence as Val-Trp and others as Val-Tyr, even when they quote the same CAS number. The molecular formula settles the question: C16H21N3O3 at 303.36 g/mol corresponds to Val-Trp (valine plus tryptophan), while a valine-tyrosine dipeptide has a different formula and molecular weight. State the sequence and formula on your purchase order so both sides mean the same molecule.

Field What to Put in Writing Why It Matters
INCI Dipeptide-2 Identifies the ingredient family, but not the exact sequence
CAS 24587-37-9 Single reference number used across major supplier listings
Sequence H-Val-Trp-OH (Val-Trp) Separates it from Val-Tyr entries that also use the name Dipeptide-2
Formula / MW C16H21N3O3 / 303.36 g/mol Confirms the tryptophan-containing structure by calculation
Identity test MS result on the batch COA Verifies the delivered lot matches the declared structure
If a supplier quotes CAS 24587-37-9 but describes the molecule as Val-Tyr, ask for the molecular formula and the MS spectrum before approving the sample.

What Does a Dipeptide-2 COA Report?

Dipeptide-2 Powder is checked lot by lot, and a batch COA records the result of each release test. The table below shows the format used for this ingredient; the batch-specific certificate issued with your order contains the measured values for that lot.

Item Specification Result
Appearance White to off white powder Conforms
Purity (HPLC) 98% min 99.45%
Identity (MS) Consistent with C16H21N3O3, MW 303.36 Conforms
Solubility Soluble in water Conforms
Conclusion Conforms to specification

Full documentation package: COA, MSDS, HPLC chromatogram, MS record and technical data sheet. A batch-specific COA is issued with each shipment.

Sourcing Checklist for Dipeptide-2 Powder

 

Use five checks to compare suppliers. These separate a defined ingredient from a listing that relies only on a trade name.

Check What to Confirm
Sequence H-Val-Trp-OH stated in writing, not just Dipeptide-2
Formula match C16H21N3O3 and 303.36 g/mol align with Val-Trp
Purity HPLC assay against a standard, with the chromatogram supplied
Safety data Heavy metals, microbiology and target-market requirements
Paperwork COA, specification, TDS, MSDS and regulatory status for your market

From Sample Approval to Bulk Order

A sample is checked against the agreed specification and COA: appearance, solubility, MS identity and behaviour in your base. Agreement on these points before the first commercial lot keeps later shipments consistent with what was approved.

Inquiry → Sample → Sequence & COA Review → Trial Order → Bulk Supply

FAQs

Q: Which CAS and sequence should appear on the purchase order?

A: Write CAS 24587-37-9, INCI Dipeptide-2 and the sequence H-Val-Trp-OH on the purchase order. Cross-check that the supplier's molecular formula is C16H21N3O3 with a molecular weight of 303.36 g/mol, which corresponds to Val-Trp rather than Val-Tyr.

Q: What documents can you provide before I place an order?

A: We provide a complete COA with HPLC, NMR, GC, UV and TLC test data. All products comply with USP, EP and CP standards, and third-party testing is fully supported.

Q: Can I evaluate a sample before committing to bulk?

A: Yes. Most products support free samples, with the client covering shipping cost. A sample lets you check the COA, sequence confirmation and your formulation fit before a commercial order.

Q: Do you accept small trial quantities and what is the MOQ?

A: Yes. Small trial orders are welcome for quality assessment, and MOQ is flexible. Sample and trial quantities support early evaluation, with bulk supply arranged according to your project requirements.

Q: What are your payment options?

A: We support Bank Transfer and Western Union.

Q: How do you ship and what is the lead time?

A: In-stock items ship within 1-3 working days; customized orders are negotiable. We offer door-to-door dedicated lines, DHL / FedEx / TNT express, air freight, and sea & railway freight, with full customs documents and clearance guidance.

Q: What happens if the goods fail inspection?

A: We offer full quality assurance. Verified quality issues qualify for free replacement or full refund.

Factory

dipeptide-2-powder-gmp-production-factory-1.jpg

dipeptide-2-peptide-qc-hplc-laboratory-2.jpg

dipeptide-2-peptide-fmoc-spps-equipment-3.jpg

Certificate

dipeptide-2-powder-gmp-certificate-1.jpg dipeptide-2-powder-iso-certificate-2.jpg

Shipping & Packing

dipeptide-2-powder-bulk-packing-standard-shipping.jpg

How To Get COA, Samples & Bulk Quotation?

HDM BIO supplies GMP-manufactured Dipeptide-2 Powder with the stated Val-Trp sequence to formulators, contract manufacturers and ingredient distributors. Every order includes a batch-specific COA, and as a direct manufacturer we offer trial quantities, flexible MOQ and OEM ODM service.

WhatsApp: +86 19991242181

Email: sales@hdmbio.com

Hot Tags: dipeptide-2 powder, China dipeptide-2 powder manufacturers, suppliers, factory, Octreotide Powder, , , ,

Send Inquiry

whatsapp

Phone

E-mail

Inquiry

Bag